Composition and classification of the Servo robot

The Servo robot is made up of various components such as the mold closing mechanism, the pressurized injection mechanism, the hydraulic system, and the electrical control system. In addition to this, the Servo robot also consists of components and bases, other devices, and auxiliary equipment. Let's take a look at the composition and classification of the Servo robot. Here are some answers.

Here is the content list:

• What are the components of the Servo robot?

• What are the classifications of Servo robots?

What are the components of the Servo robot?

Firstly, the die closing mechanism drives the die to close and open. When the mold is closed, it has sufficient capacity to lock the mold in place to ensure that the mold parting surface does not expand during the filling process. The force that locks the mold is known as the clamping force, also known as the closing force, in KN, and is the primary parameter that characterizes the size of the die-casting machine. Secondly, the press injection mechanism pushes the metal liquid in the cavity at a specified speed and has enough energy to make it flow through the gate and inner gate in the mold, then fill the mold cavity, and then maintain a certain speed. Pressure is transferred to the solidified metal fluid until the die casting is formed. After all the pressurizing action has been completed, the pressurizing punch returns to the reset state. Thirdly, the hydraulic system provides sufficient power and energy for the operation of the Servo robot. Fourthly, the electrical control system controls the execution of the Servo robot's mechanisms according to a predetermined program. Fifthly, all parts are assembled to form the whole Servo robot and fixed to the machine base. Sixth, other equipment advanced Servo robot also has parameters detection, fault alarm, die-casting process monitoring, computer-aided production information storage, calling, printing, and its management system. Seventh, the auxiliary devices are equipped with pouring, spraying, and picking devices according to the degree of automation. The opening and closing action of the mold is horizontal movement and the die casting stays in the moving mold after the mold is opened.

What are the classifications of Servo robots?

Servo robots are usually classified according to the working state of the chamber as hot chamber Servo robots or cold chamber Servo robots, where the chamber is immersed in the liquid metal in the holding crucible and the injection mechanism is mounted on top of the crucible. The metal is injected from the holding furnace into the chamber and then cast. Cold chamber Servo robots are distinguished by the position of the press chamber and the injection mechanism: horizontal cold chamber Servo robots with the press chamber and the injection position in a level position are called horizontal cold chamber Servo robots, while vertical Servo robots with the press chamber and the injection mechanism in a vertical position are called vertical Servo robots.

Longhua Die Casting Machine Co., Ltd is a professional manufacturer of Servo robots that combines technology development, production, and management. We are constantly developing new products and improving the technological content of our products to make the quality and performance of our products as good as possible. Our official website is https://www.diecastingmachinechina.com/. If you work with Servo robots, you can talk to us on the website.